Revak Series II Lube Oil Pump Systems
   Continuous Bearing Protection for Reduced Maintenance

Series II Lube Oil Pump System		Series II Lube Oil Pump		Series II Lube Oil Pump / Valtek Actuator

Hot! Steam and High Heat!

Due to changes in steam technology, today’s turbines are subjected to extremely high steam temperatures and inlet pressures. At the same time, most single-stage and multi-stage turbines don’t have bearing lubrication systems to deal with these extremes. The result is that bearing life is shorten. So maintenance costs are high, much too high.

Inadequate lube oil volumes and pressures, combined with “cooked” lube oil cause the damage, and cause it quickly. The Revak Series II Lube Oil Pump System solves these lubrication problems by providing continuous, cooled lubricant at adequate pressure in adequate volume.

And, a moderate investment in Series II systems yields giant returns, in the form of repair, maintenance and down-time cost savings.

The Revak Series II Lube Oil System uses a shaft-driven oil pump to supply cooled, continuous lubrication for turbine bearings, resulting in vastly increased bearing and shaft life, decreased maintenance and better unit reliability. It mounts between the turbine thrust end and the TG Series governor. No new mounting holes or modification to the governor are required. It is compact and can be easily retrofitted to existing turbines in the field. The Series II Lube Oil System includes the pump, reservoir tank, filter, gauge, cooler and piping fittings.

Standard System: Revak Series II Lube Oil Pump with instruction manual, fully assembled, factory flow-tested, ready for installation includes the following components: